Black BLK-HD4E Instrukcja Użytkownika Pobierz pdf (Strona 26)

SECTION 2: HARDWARE OVERVIEW AND SETUP

2.5.2 BLK-HD4D, BLK-HD8D HDD installation

The HDD is used to store video and snapshots recorded by the DVR. Normally, DVRs have one internal HDD and one internal

DVD-R/W drive. However, a second internal HDD can be installed in place of the DVD drive, if needed.

Your DVR will accommodate one standard-size desktop system HDD with a SATA interface. If your DVR was purchased without an

HDD, a hardware kit, including mounting brackets, screws and cables is included with the DVR.

For attaching bracket

to DVD-R/W (at-head,

ne-thread screws (4))

For attaching bracket to

HDD (pan-head, medium-

thread screws (4))

For attaching bracket

to chassis (pan-head,

course-thread screws)

Mounting Brackets (one pair per drive) Screw types

To install an HDD, carefully follow the procedure below.

CAUTION



Follow recommended electrostatic discharge (ESD) guidelines while performing this procedure. Install the HDD in a static-free

environment, wearing a certied ESD wrist strap. If a static free environment and ESD wrist strap is not available, touch the bare

metal of the DVR chassis frequently when installing the drive to dissipate the static charge naturally generated on your skin and

clothing.

1. If your DVR is powered on, use the menu system to perform a System Shutdown.

a. Right click anywhere on the live view screen, then click SYSTEM SHUTDOWN in the pop-up menu (see “SECTION 3

System Setup” on page 28), or click the SYSTEM SHUTDOWN icon on the task bar.

b. Follow the on-screen instructions for shutting down the system.

2. Disconnect the power adapter from the back of the DVR.

3. Remove the top cover from the DVR by removing the three cover screws on the back of the chassis, and the two on each side.

See the drawing below.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 123 124

Brak uwag

Black BLK-HD4E Instrukcja Użytkownika Strona 26