Black 8 Channel DVR Dokumentacja Pobierz pdf (Strona 31)

HDD Management

This is the HARD DRIVE (HDD) MANAGEMENT screen. All aspects of the hard

drive can be managed from this screen.

Additionally, this is the place to go if you want to know exactly how much space

is left on the hard drive, and how much footage you can record to it.

HDD STATUS: If the hard drive is not installed properly you will see a message

saying NO DISK FOUND. The live view screen will display the icon

on the bottom of Channel 1’s display if the hard drive is not being

detected.

TOTAL SPACE: Total size of the hard drive currently installed.

FREE SPACE: Total amount of free space available on the hard drive(s) currently

installed.

AVAILABLE TIME:Free space currently available in hours, calculated based on your

current record quality settings. (Note: If you have OVERWRITE

enabled, this value will be redundant.)

OVERWRITE: When enabled, the DVR will record over the  les already stored on

the hard drive. Using the overwrite option is advisable, as the DVR

will always be able to record events as they happen. However, it

does mean that you’ll need to get important events o the HDD

before they’re overwritten.

Say, for example, you are trying to monitor your front yard, whilst in the background

there is a busy street, and the cars driving past continually set o the motion

detection. What can you do about it? Setting only part of the camera’s view to be

motion sensitive might be the answer. This is useful in a number of circumstances,

such as monitoring one particular door at the end of a busy hallway, or a backyard

with a tree that keeps blowing in the wind.

To set the MOTION DETECTION AREA

• In the MOTION DETECTION menu, use the mouse or the arrow buttons to highlight

the SETUP button for the channel you wish to setup the MOTION DETECTION

AREA for, and con rm by pressing select or left clicking.

• You will see a grid (15 x 12) of red boxes.

The red boxes mark the area that is sensitive to motion.

• Use the arrow buttons or the mouse to move the cursor around the screen.

• By pressing select or left clicking an area in the grid, you can toggle motion

detection ON or OFF in that location.

• Areas marked by red boxes will be sensitive to motion, those not marked will not

be.

• Click and drag to select the area you want to select or deselect.

In this example, the entire screen area is activated.

A su cient amount of movement (depending on

your sensitivity settings) anywhere in the screen

will trigger the motion detection.

This example shows the same image, but the top

left side of the motion area is not activated, and

neither are the edges of the screen. Movement in

these areas will not trigger the motion detection.

Motion Detection Area Setup

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Komentarze do niniejszej Instrukcji

Brak uwag

Black 8 Channel DVR Dokumentacja Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Cyfrowe rejestratory wideo (DVR) Black 8 Channel DVR